Incra Pro Fence System Manuel d'utilisateur télécharger pdf

Fence System

PRO

Please be sure to

read this Owner’s

Manual before use

and keep it at hand

for future reference.

SAFETY

Important safety instructions

for using the INCRA PRO Fence

System

■ Before using the INCRA PRO Fence

System, read and follow all of the

instructions and safety information in

this manual.

■ When using the INCRA PRO Fence

System in conjunction with any

other tool, first read and follow all

instructions and safety information in

that tool’s owner’s manual.

■ Use appropriate safety devices.

Keep hands clear of the bit or blade.

Always use a push stick, rubber

soled push block or other safety

devices to keep your hands safely

away from the cutting tool.

■ Never let any part of the INCRA

PRO Fence System interfere with

another tool’s safety guards or other

safety equipment.

■ Never let the bit or blade come into

contact with the aluminum body of

the INCRA PRO Fence, INCRA Stop

or Stop Extender Bar.

■ Always turn off the power and

make sure that the bit or blade is

fully stationary before changing the

setting of any part of the INCRA

PRO Fence, INCRA Stop or Stop

Extender Bar.

■ Wear safety glasses, hearing

protection and follow all normal shop

safety practices.

■ When using negative fence settings

in which the bit is partially recessed

in the fence notch, always insure

that the bit is centered within the

notch.

■ Do not use any router bit with a

diameter greater than

⁄4" without

first mounting a wooden auxiliary

fence as detailed on page 8.

■ When using the Stop Extender

Bar, make sure that it is securely

fastened to the fence with the

supplied mounting hardware. When

not in use, store the Extender

Bar inside the upper T-slot on the

Fence and secure in place with the

supplied hardware.

WARRANTY

Taylor Design Group, Inc. warrants this product for one year from date of purchase. We

will repair, without charge, any defects due to faulty material or workmanship, or at our

option, replace the product free. Please return the failing part only, transportation prepaid,

along with a description of the problem to the address on the back of this manual.

LIFETIME WARRANTY ON POSITIONING RACKS

If an INCRA positioning rack in this tool becomes damaged for any reason, Taylor Design

Group will replace it free of charge for as long as you own the tool. Return the damaged

rack, transportation prepaid, and allow 1 to 2 weeks for delivery.

NOTE: Replacements cannot be sent unless damaged racks have been received

by Taylor Design.

Mounted to your INCRA JIG, the

INCRA PRO Fence System provides

a solid, smooth, and flat guide surface

for the various cutting operations in

your shop. A top-mounted sliding

scale and INCRA’s patented saw-

toothed racks provide the means for

easy and extremely accurate stopped

cut setups using the INCRA Stop.

Coupled with the added convenience

and function of a self-storing Stop

Extender Bar with its own sliding

scale and variable stop, the INCRA

PRO Fence System will add new

dimensions to your abilities in the

wood shop.

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Fence System

Fence SystemPROPlease be sure to read this Owner’s Manual before use and keep it at hand for future reference.SAFETYImportant safety instructions for

Page 2 - Parts List

2Parts List28" INCRA PRO FENCE SYSTEMFence Assembly1 ea. 28" INCRA Pro Fence1 ea. 16" long, 1⁄32" ruled scale4 ea. 1⁄32"

Page 3 - Assembly

Assemble the INCRA Stop Using the (2) #8 – 32 x 3⁄8" phillips pan head screws and #8 – 32 hex nuts, fasten the 4" long blue INCRA rack to th

Page 4 - …to the INCRA JIG PRO:

Insert the #10 – 32 x 11⁄8" phillips pan head screws through the thick (gold) washers then through the holes on the back of the fence mounting

Page 5 - Adjusting the Fence Angle

5Adjusting the Fence AngleNote: Only the 18" INCRA PRO Fence can be mounted to the Original INCRA JIG.Important: Your Original INCRA JIG must b

Page 6 - Applications

6Installing the Extender BarApplications Fig.9 shows the proper placement for your Stop Extender Bar. Insert the Extender Bar with the scale facing

Page 7 - Operations

7Zeroing the INCRA Stop to the End of a BoardFor most applications, you will be using your INCRA Stop on the outfeed end of the INCRA Fence to control

Page 8 - Your INCRA PRO Fence

8FIG. 16X-Y Positioning at the drill press3⁄16" dia. through hole, 1⁄2" dia. counterbore (See Note above for counterbore depth)FIG. 17Auxi

Commentaires sur ces manuels

Pas de commentaire

Incra Pro Fence System Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Incra Pro Fence System. INCRA Pro Fence System User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Incra Pro Fence System